Features
– A massive power supply using a custom toroidal transformer design
– 5 line-level inputs including a front-mounted 1/8″ mini-jack for personal media players
– Headphone output on 1/4″ TRS jack located on the front panel
– One audio input which functions as a “pass-through”, bypassing the gain stage to
accommodate a component such as a home-theater processor, whose own volume control is
used instead.
– Proprietary MOON Bipolar output transistors with unprecedented gain linearity resulting in
improved bass response and even more accurate sonic reproduction
– “Class A” output to 5 watts for greater efficiency
– 12 Volt trigger output for remote operations
– RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates
– IR input for external control
– SimLink™ controller port for 2-way communications with other compatible MOON components
– Rigid chassis construction to minimize the effects of external vibrations
– Optimized selection of very high quality electronic components
– Low operating temperature for an ultra-long life expectancy
X = XLR-kaart met gebalanceerde ingangen
Wordt standaard geleverd in de MOONNeo 340i D3PX
D3 = DAC-kaart, 4 inputs , DSD64/128/256 + tot 32bit/384kHz op USB
Wordt standaard geleverd in de MOON Neo 340i D3PX
P = MM/ MC Phono-kaart volledig configureerbaar
Wordt standaard geleverd in de MOON Neo 340i D3PX
Configuration: | Single-ended / 2-channel |
Power Supply Transformer: | 400VA |
Power Supply Capacitance: | 40,000µF |
Class of operation – Amplifier: | A/AB |
Single Ended Inputs (RCA): | 4 pairs |
Mini-jack Input (1/8″): | 1 |
Optional Balanced Inputs: | (XLR) 1 pair |
Input Sensitivity: | 400mV – 3.0V RMS |
Input Impedance: | 22,000 Ω |
Preamplifier Output: | 1 pair |
Output Device Types – Amplifier: | Bipolars – 4 per channel |
Output Power @ 8Ω: | 100 Watts per channel |
Output Power @ 4Ω: | 200 Watts per channel |
Output Impedance: | 0.04Ω |
Damping Factor: | > 200 |
Gain: | 37dB |
Dynamic Headroom: | 3dB |
Signal-to-noise Ratio: | 110dB @ full power |
Maximum Output Voltage: | 30 Volts |
Slew Rate: | 20V/µs |
Maximum Current – Peak: | 22 amperes |
Maximum Current – Continuous: | 12 amperes |
Frequency Response : | 2Hz – 90kHz (+0/-3dB) |
Crosstalk @ 1kHz: | -88dB |
IMD: | < 0.03% |
THD (20Hz – 20kHz @ 1 watt): | < 0.03% |
THD (20Hz – 20kHz @ 100 watts): | < 0.05% |
12 Volt Trigger Output Operation: | Direct Logic (0V = off, 12V=on) using a 3.5mm mono jack with an output impedance of 1000Ω and current requirement of 12mA |
SimLink™ Port: | 1 input + 1 output each on 1/8″ mini-jack |
RS-232 Port: | 9-pin female DB connector |
IR input: | 1/8″ mini-jack |
Remote Control: | CRM-2 Full Function |
Power Consumption @ idle: | 45 Watts |
AC Power Requirements: | 120V / 60Hz 220-240V / 50Hz |
Gewicht: | 13 kg |
Breedte: | 43 cm |
Hoogte: | 8,9 cm |
Diepte: | 37,5 cm |